اینورتر تک فاز 1.5 کيلووات اشنایدر ATV312HU15M2

variable speed drive ATV312 – 1.5kW – 3.2kVA – 90W – 200..240 V- 1-phase supply

اینورتر تک فاز 1.5 کيلووات اشنایدر ATV312HU15M2

اینورتر تک فاز 1.5 کيلووات اشنایدر ATV312HU15M2

Main
Range of Product Altivar 312
Product or Component Type Variable speed drive
Product destination Asynchronous motors
Product Specific Application Simple machine
Assembly style With heat sink
Component name ATV312
Motor power kW 1.5 kW
Maximum Horse Power Rating 2 hp
[Us] rated supply voltage 200…240 V – 15…10 %
Supply frequency 50…60 Hz – 5…5 %
Phase Single phase
Line current 15.8 A 200 V, Isc = 1 kA
13.3 A 240 V
EMC filter Integrated
Apparent power 3.2 kVA
Maximum transient current 12 A 60 s
Power dissipation in W 90 W at nominal load
Speed range 1…50
Asynchronous motor control profile Sensorless flux vector control with PWM type motor control signal
Factory set : constant torque
Electrical connection Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1…LI6 terminal 0.004 in² (2.5 mm²) AWG 14
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.008 in² (5 mm²) AWG 10
Supply Internal supply for logic inputs 19…30 V 100 mA overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm) 10…10.8 V 10 mA overload and short-circuit protection
Communication Port Protocol CANopen
Modbus
IP degree of protection IP20 on upper part without cover plate
IP21 on connection terminals
IP31 on upper part
IP41 on upper part
Option card Communication card CANopen daisy chain
Communication card DeviceNet
Communication card Fipio
Communication card Modbus TCP
Communication card Profibus DP
Complementary
Supply voltage limits 170…264 V
Prospective line Isc 1 kA
Continuous output current 8 A 4 kHz
Output frequency 0…500 Hz
Nominal switching frequency 4 kHz
Switching frequency 2…16 kHz adjustable
Transient overtorque 170…200 % of nominal motor torque
Braking torque 150 % 60 s with braking resistor
100 % with braking resistor continuously
150 % without braking resistor
Regulation loop Frequency PI regulator
Motor slip compensation Automatic whatever the load
Adjustable
Suppressable
Output voltage <= power supply voltage
Tightening torque Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1…LI6 5.3 lbf.in (0.6 N.m)
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 10.6 lbf.in (1.2 N.m)
Insulation Electrical between power and control
Analogue input number 3
Analogue input type AI1 configurable voltage 0…10 V 30 V max 30000 Ohm
AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm
AI3 configurable current 0…20 mA 250 Ohm
Sampling duration AI1, AI2, AI3 8 ms analog
LI1…LI6 4 ms discrete
Response time AOV, AOC 8 ms analog
R1A, R1B, R1C, R2A, R2B 8 ms discrete
Linearity error +/- 0.2 % output
Analogue output number 1
Analogue output type AOC configurable current 0…20 mA 800 Ohm 8 bits
AOV configurable voltage 0…10 V 470 Ohm 8 bits
Discrete input logic Logic input not wired LI1…LI4), < 13 V
Negative logic (source) LI1…LI6), > 19 V
Positive logic (source) LI1…LI6), < 5 V, > 11 V
Discrete output number 2
Discrete output type Configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC – 100000 cycles
Configurable relay logic R2A, R2B) NC – 100000 cycles
Minimum switching current R1-R2 10 mA 5 V DC
Maximum switching current R1-R2 2 A 250 V AC inductive, cos phi = 0.4 7 ms
R1-R2 2 A 30 V DC inductive, cos phi = 0.4 7 ms
R1-R2 5 A 250 V AC resistive, cos phi = 1 0 ms
R1-R2 5 A 30 V DC resistive, cos phi = 1 0 ms
Discrete input number 6
Discrete input type LI1…LI6) programmable 24 V, 0…100 mA PLC 3500 Ohm
Acceleration and deceleration ramps S, U or customized
Linear adjustable separately from 0.1 to 999.9 s
Braking to standstill By DC injection
Protection type Input phase breaks drive
Line supply overvoltage and undervoltage safety circuits drive
Line supply phase loss safety function, for three phases supply drive
Motor phase breaks drive
Overcurrent between output phases and earth (on power up only) drive
Overheating protection drive
Short-circuit between motor phases drive
Thermal protection motor
Insulation resistance >= 500 mOhm 500 V DC for 1 minute
Local signalling for drive voltage 1 LED (red)
for CANopen bus status four 7-segment display units
Time constant 5 ms for reference change
Frequency resolution Analog input 0.1…100 Hz
Display unit 0.1 Hz
Connector type 1 RJ45 Modbus/CANopen
Physical interface RS485 multidrop serial link
Transmission frame RTU
Transmission Rate 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
4800, 9600 or 19200 bps Modbus
Number of addresses 1…127 CANopen
1…247 Modbus
Number of drive 127 CANopen
31 Modbus
Marking CE
Operating position Vertical +/- 10 degree
Outer dimension 184 x 149 x 145 mm
200 x 180 x 144 mm
143 x 105 x 150 mm
Height 5.6 in (143 mm)
Width 4.2 in (107 mm)
Depth 6.0 in (152 mm)
Net Weight 4.0 lb(US) (1.8 kg)
Environment
Dielectric strength 2040 V DC between earth and power terminals
2880 V AC between control and power terminals
Electromagnetic compatibility 1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Standards IEC 61800-3
IEC 61800-5-1
Product Certifications UL
DNV
C-tick
CSA
NOM
GOST
pollution degree 2
Protective treatment TC
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn 11 ms EN/IEC 60068-2-27
Relative humidity 5…95 % without condensation IEC 60068-2-3
5…95 % without dripping water IEC 60068-2-3
Ambient Air Temperature for Storage -13…158 °F (-25…70 °C)
Ambient air temperature for operation 14…122 °F (-10…50 °C) without derating with protective cover on top of the drive)
14…140 °F (-10…60 °C) with derating factor without protective cover on top of the drive)
Operating altitude <= 3280.84 ft (1000 m) without derating
3280.84…6561.68 ft (1000…2000 m) with current derating 1 % per 100 m
Ordering and shipping details
Category US1CP4B22152
Discount Schedule CP4B
GTIN 3606480077562
Returnability No
Country of origin US
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 6.77 in (17.185 cm)
Package 1 Width 6.82 in (17.319 cm)
Package 1 Length 8.17 in (20.75 cm)
Package 1 Weight 4.336 lb(US) (1.967 kg)
Unit Type of Package 2 S06
Number of Units in Package 2 27
Package 2 Height 28.94 in (73.5 cm)
Package 2 Width 23.62 in (60 cm)
Package 2 Length 31.50 in (80 cm)
Package 2 Weight 138.9 lb(US) (63 kg)
Package 3 Height 31.50 in (80 cm)
Contractual warranty
Warranty 18 months

توضیحات تکمیلی

نوع:

تک فاز

توان موتور:

1.5KW کاربرد سبک

هیت سینک:

دارد

فیلتر EMC:

دارد

پنل گرافیکی:

دارد

پرتکل ارتباطی:

Modbus , CANopen

پورت ارتباطی:

RJ45

نرم افزار سازگار:

SoMove

درجه حفاظت:

IP20

کاربرد موتور:

کنترل موتور های آسنکرون

محصول جایگزین:

ATV320

کاتالوگ

https://pishrosanatnovin.com/wp-content/uploads/2025/04/Schneider-Electric_Altivar-312-Variable-Frequency-Drives-VFD_ATV312HU15M2.pdf

نقد و بررسی‌ها

هنوز بررسی‌ای ثبت نشده است.

اولین کسی باشید که دیدگاهی می نویسد “اینورتر تک فاز 1.5 کيلووات اشنایدر ATV312HU15M2”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

حمل و نقل

همه زمان های تخمینی ارسال علاوه بر زمان های تکمیل است، برای سفارش هایی که قبل از ساعت ۶:۳۰ بعدازظهر انجام می شوند، یک روز کاری بعدی تحویل می دهیم. از شنبه تا پنجشنبه. سفارش هایی که بعد از این ارسال می شوند، ظرف دو روز کاری تحویل داده می شوند. .

Shipping
  • ارسال رایگان بالای 50 میلیون تومان
  • ارسال در سریع ترین زمان با کم ترین هزینه
  • تهران خرید بالای 20 میلیون ارسال رایگان
  • ارسال با پست ، تیپاکس ، باربری و ترمینال

    بازگشت و پرداخت

    ما یک خط مشی بازگشت ۱۴ روزه داریم، به این معنی که شما ۱۴ روز پس از دریافت کالای خود فرصت دارید تا درخواست بازگشت بدهید، برای واجد شرایط بودن برای بازگرداندن، کالای شما باید در همان شرایطی باشد که آن را دریافت کرده اید، استفاده نشده و در اصل آن باشد. بسته بندی. همچنین به تأیید سفارش، شماره سفارش یا مدرک خرید نیاز دارید. پس از دریافت و بازرسی بازگشت شما، به شما اطلاع می دهیم و به شما اطلاع می دهیم که آیا بازپرداخت تأیید شده است یا خیر. در صورت تایید، به صورت خودکار از طریق روش پرداخت اصلی به شما بازپرداخت می شود. لطفاً به یاد داشته باشید که پردازش و ارسال بازپرداخت بانک یا شرکت کارت اعتباری شما نیز ممکن است کمی طول بکشد.برای درخواست بازگشت باید دلیل موجه در مورد جنس یا عدم تایید و یا مغایرت کالای ارسالی با پیش فاکتور ارسالی داشته باشین.

نقد و بررسی‌ها

هنوز بررسی‌ای ثبت نشده است.

اولین کسی باشید که دیدگاهی می نویسد “اینورتر تک فاز 1.5 کيلووات اشنایدر ATV312HU15M2”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *